Concrete Driveways in Melbourne, FL
New driveways, full replacements and widening projects across Melbourne and South Brevard County. We prep the base for sandy soil, handle the permit and the right-of-way, and pour a driveway built to carry your cars for decades.
Driveway Services for Brevard County Homes
Whether your old driveway is cracked and sinking or you’re building from scratch, we pour concrete driveways in Melbourne that are prepped, reinforced and finished for Florida conditions.
New Concrete Driveways
For new homes, gravel or shell driveways you’re ready to upgrade, or a second parking pad. We grade, compact, form and pour, then finish with a non-slip broom texture or a decorative finish.
Driveway Replacement
Cracked, settled or root-lifted? We break out the old slab, haul it away, fix whatever caused the damage underneath, and pour a new driveway on a solid base.
Widening & Extensions
Need room for a third car, a boat or an RV pad? We tie new concrete into your existing driveway and design the extension around your city’s width limits at the street.
Decorative Driveway Finishes
Stamped patterns, colored concrete, exposed aggregate or a clean border around a broom-finish field. We’ll show you options that fit your home and your budget.
Why Driveways Crack Here, and How We Prevent It
Melbourne driveways don’t fail from freezing. They fail from what’s underneath: loose sand that settles, water washing out the base after summer storms, and tree roots pushing up the slab. That’s why most of our work happens before the first truck of concrete shows up.
Most residential driveways are poured around 4 inches thick. If you park an RV, a boat trailer or a work truck, we go thicker and add more reinforcement where the weight sits.
- Compacted sub-base. We grade and compact the soil so the slab sits on firm ground, not loose sand.
- Reinforcement for the load. Rebar, wire mesh or fiber, matched to what you’ll park on it.
- Slope and drainage. Water runs away from your garage and toward the swale, not under the slab.
- Control joints. Cut at the right spacing so any cracking happens in the joints, where it won’t show.
- Proper curing. In summer we pour early and keep the slab moist so it doesn’t dry too fast.
We Handle the Permit and the Paperwork
A driveway connects your property to a public road, so the part near the street usually falls under city or county rules. The City of Melbourne requires a permit for new and replacement driveways, and work in the right-of-way in unincorporated Brevard County needs a county right-of-way permit.
In unincorporated Brevard, the homeowner is responsible for the driveway section in the right-of-way, including the culvert pipe under it. On lots with open drainage swales, the county can also require a survey by a Florida-licensed surveyor. We check all of this during the estimate. Living in an HOA? See what changed in 2026 for HOA driveway approval.
- Melbourne: permit required for new and replacement driveways.
- West Melbourne: plans must show slab thickness, reinforcement and concrete strength.
- Palm Bay: limits on driveway width at the right-of-way, so we design extensions to get approved.
- Melbourne Beach: stamped or decorative concrete in the right-of-way needs a signed agreement with the town.
Concrete Driveway Cost in Melbourne, FL
Here are typical Florida price ranges so you know what to expect. Your exact price depends on size, access, tear-out, thickness, finish and permit requirements, and you get it in writing after a free on-site estimate. For typical numbers, see our concrete cost guide.
| Driveway project | Typical cost |
|---|---|
| New broom-finish concrete driveway | $6–$10 / sq ft |
| Replacement, including tear-out and haul-away | $8–$12 / sq ft |
| Stamped or decorative concrete driveway | $12–$18+ / sq ft |
Ranges reflect typical 2026 pricing for residential concrete work in Florida and are for general guidance only.
Concrete Driveway Questions
How long does a driveway replacement take?
Most residential driveways take a few days of work: tear-out and base prep, then forming and pouring, then curing. The exact schedule depends on size, the permit and the weather, and we give you a timeline with your estimate.
When can I drive on my new driveway?
As a general rule, you can walk on it after about a day and drive a regular car on it after about a week. Heavy vehicles like RVs and moving trucks should wait until the concrete reaches full strength, around four weeks.
Is concrete better than pavers for a driveway in Florida?
Concrete costs less upfront, needs little maintenance and doesn’t grow weeds between joints. Pavers are easier to repair one piece at a time but need regular sanding and sealing. If you like the paver look, stamped concrete gives you that style as one solid slab. For a decorative look without pavers, see stamped concrete.
Can you fix my driveway instead of replacing it?
Sometimes. Small cracks and minor settling can often be repaired. If the slab is badly broken, heaving from roots or sinking in large sections, replacement is the honest answer. We’ll tell you which one you need after looking at it. See our concrete repair and leveling page.
Ready for a New Concrete Driveway?
Get a free on-site estimate and a clear written price from a local Melbourne crew. We also pour concrete in Palm Bay, West Melbourne, Melbourne Beach, Satellite Beach and Rockledge.