Concrete Contractor in Palm Bay, FL
Driveways, stamped patios, pool decks, walkways and concrete repair for homes across Palm Bay, from Port Malabar to Bayside Lakes. We know the city’s driveway and swale rules, we pull the permit with Public Works, and we pour concrete built for Palm Bay’s sandy lots and heavy summer rain.
Local Concrete Work for Palm Bay Homes
Much of Palm Bay is single-family homes on open-drainage streets, where the driveway crosses a roadside swale to reach the road. That makes the part of the driveway near the street just as important as the slab in front of your garage: it has to keep water moving through the swale and pass the city’s inspection. We plan for both from the first visit.
Driveways & Widening
New driveways, replacements and extensions for an extra car, a boat or an RV, designed around Palm Bay’s width limits at the right-of-way. Driveway details
Stamped Patios & Pool Decks
Backyard patios, lanai extensions and pool deck resurfacing with non-slip finishes. Stamped concrete · Pool decks
Walkways & Slabs
Front walks, side paths and slabs for sheds, hot tubs and AC units. Walkways · Patios & slabs
Repair & Leveling
Cracked, sunken or root-lifted concrete, with an honest answer on repair versus replacement. Concrete repair
Palm Bay Driveway Permits, Swales and Culverts
Under the Palm Bay city code, building, removing, repairing or relocating a driveway, culvert, curb or sidewalk in a city road or easement requires a driveway permit from the Public Works Department. The swale has to be built where the permit specifies.
In practice, that means the end of your driveway isn’t just a matter of taste. Whether it’s a swale driveway or sits on a culvert pipe, and how wide it can be at the street, all follow the city’s requirements. Driveways wider than 32 feet at the right-of-way can be refused, so we design extensions to fit.
- Permit from Public Works before any driveway or culvert work in the right-of-way.
- Swale kept open so roadside drainage keeps flowing after the job.
- Width checked against the city’s limit at the right-of-way.
- Drawing with the application, showing the driveway location and width at the property line.
- Inspections scheduled and passed before the job is closed.
Why Prep Matters on Palm Bay Lots
Palm Bay’s sandy soil drains fast, but it also shifts and washes out when it isn’t compacted. Add summer downpours running toward the swale and tree roots from mature oaks, and you get the cracked, sunken driveways we’re often called to replace. The fix is in the prep, not in thicker concrete alone.
- Compacted sub-base so the slab doesn’t settle.
- Slope toward the swale, away from your garage and front door.
- Reinforcement sized for cars, boats or RVs.
- Control joints placed so cracks stay straight and hidden.
Concrete Prices in Palm Bay
Typical Florida ranges apply in Palm Bay too: about $6 to $10 per square foot for a new broom-finish driveway, $8 to $12 with tear-out, and $12 to $18 or more for stamped concrete. Permit and culvert requirements can add to the total, which we include in your written estimate. See our full concrete cost guide.
Palm Bay Concrete Questions
Do I need a permit to replace my driveway in Palm Bay?
Yes, for the part of the driveway in the city road or easement. Palm Bay’s code requires a driveway permit from the Public Works Department to build, remove, repair or relocate a driveway, culvert or sidewalk there. We handle the application.
What’s the difference between a swale driveway and a culvert driveway?
A swale driveway dips down so roadside water flows across it. A culvert driveway sits on a pipe that carries the water underneath. Which one your lot needs depends on the city’s drainage requirements for your street.
Can I widen my driveway for a boat or RV?
Usually, yes, as long as the total width at the right-of-way stays within the city’s limit. We design the extension so it gets approved and the slab is thick enough for the weight.
Need a Concrete Contractor in Palm Bay?
Free on-site estimate, written price, permit handled. Call today.